Hanging Hardware

The OPW 241TPS swivel is designed for applications where easy nozzle and hose handling is important for customer convenience. The OPW 241TPS is installed between the nozzle and hose to reduce customer strain, provide flexibility and reduce premature hose wear.

Features

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends. 
• Allows for easy nozzle positioning in fill pipes – Utilizing two planes of rotation.
• Reduces premature hose wear – Utilizing two planes of rotation.
• Added protection vs. thermal and chemical degradation – Dual Seals.
• 50 psi (3.45 bar) maximum pressure.

The OPW  swivel is designed for applications where easy nozzle and hose handling is important for customer convenience. The OPW 241TPS is installed between the nozzle and hose to reduce customer strain, provide flexibility and reduce premature hose wear.

Features

• UL and ULC listed for use in gasoline, diesel, and up to 10% ethanol blends. 
• Allows for easy nozzle positioning in fill pipes – Utilizing two planes of rotation.
• Reduces premature hose wear – Utilizing two planes of rotation.
• Added protection vs. thermal and chemical degradation – Dual Seals.
• 50 psi (3.45 bar) maximum pressure.

The OPW 11® Series automatic nozzles are OPW’s premium conventional nozzles for safe retail and commercial petroleum filling.

<sub>The OPW 11BP Nozzle is a sturdy industry-proven standard used primarily for fueling up to 15 gallons per minute. The 11BP is an automatic dispensing nozzle designed for use in transfer pump. This nozzle should not be used for retail applications, and does not include a No Pressure – No Flow or Interlock Device.

Design working pressure50 psi (3.45 bar) maximum pressure.When bushing from 1&quot; hose on the 1A nozzle, use a 28S Bushing Adaptor
MaterialsBody: AluminumSpouts: AluminumInlet size: 3/4&quot; NPTDisc: Viton
WE ARE GENUINE SOUTH INDIAN DISTRIBUTOR FOR M/S TOKHEIM INDIA PVT LTD – USA.</sub>

Replacement Spout are availabe for all varieties of nozzles -  3/4" and 1".

debris or insects. A normally closed poppet in the valve opens at a predetermined pressure or vacuum setting to allow the tank to vent.

Features:

• A Variety of Pressure/Vacuum Settings
• Reliable Service
• Corrosion-Resistant Construction
• Easy Installation
• High Maximum Flow Rate
• 40-Mesh Stainless Steel Wire Screen

The OPW 66REC is the first dry reconnectable breakaway for the conventional dispensing market. It is designed to be installed on fuel dispensing hoses and will separate when subjected to a designated pull force.

WE ARE GENUINE SOUTH INDIAN DISTRIBUTOR FOR M/S TOKHEIM INDIA PVT LTD – USA

The HAS Series Hoses are UL approved, steel reinforced hardwall flexible to -40°F. 3/4 inch inside diameter with 3/4 inch male NPT chrome crimped ends. Compatible with fuel blends up to E-15 & B-20. Maximum working pressure 50PSI. Also available in Low Permeation per UL330.

WE ARE GENUINE SOUTH INDIAN DISTRIBUTOR FOR M/S TOKHEIM INDIA PVT LTD – USA.